You are here: Video upute

MC-Elektronika video-nadzor, alarmi, web-shop

Video upute

E-mail Ispis PDF
Assemble Wireless Controller



1. Assemble power supply and connect to controller
2. Connect network cable to a free port on your broadband router
3. Connect the other end of the network cable to the controller

 

Assemble Wired Cameras



1. Attach the camera head to the bracket supplied.
2. Assemble the power supply and attached to the camera as shown in the video.
3. Attach one end of the network cable to your broadband router.
4. Attach the other end of the network cable to the camera.

 

Assemble Wireless Dongle for WIFI cameras



1. Assemble WIFI dongle antenna
2. Insert dongle into one of the USB ports on the rear of the controller

 

Assemble Wireless Cameras

1. Attach the camera head to the bracket supplied.
2. Attach antenna to the camera head.
3. Assemble the power supply and attached to the camera as shown in the video.
4. During discovery you will need to attach the wireless camera to your rooter.
5. Attach the other end of the network cable to the camera.
6. Now start the discovery process in your online account. Once the camera has fully discovered, which should automatically appear. You then need to remove the network cable first from the camera- then wait 5 seconds before rebooting the camera power.

Once the camera has restarted it should begin to operate on it’s wireless connection. All wireless cameras will need to be discovered this way.

 

Assemble Keypad

1. Remove the cover from the rear panel from the bottom with the plastic pin provided
2. Insert the batteries correctly as marked on the inside of the keypad
3. Fit the rear cover by inserting the top end first and by pushing the bottom down
4. Ensure the remote access account is in discovery mode – insert the plastic pin provided into the discover hole on the rear of the keypad.
5. In order for your Keyfobs to register on the system you must present them to the keypad as shown in the video. We will explain how enable and name each fob in the next video.

 

Assemble Siren

1. Simply plug the siren into a wall socket.
2. The Discovery button is located on the side to the bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
3. You can test the chirp function of the siren by pressing the top right button. This button also acts like a beacon and flashes when system is in alarm.

 

Assemble Door Window Sensor

1. Assemble the antenna as shown in the video
2. Insert the batteries correctly as indicated on the inside of the sensor.
3. The Discovery button is located on the rear left to the bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
4. You can now test the device by placing the magnet to the to left or right, when you pull it away the lights will change green to red. For detailed instructions on how to mount the door window sensor please see the “Help” button on our website.

 

Assemble Motion Sensor

1. Gently open the motion sensor as shown in the video
2. Insert the batteries correctly as indicated on the inside of the sensor.
3. The Discovery button is located on the rear – bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
4. Now gently close the device and see further mounting instructions if needed under the Help button on our website.

 

Assemble Power Controller

1. Simply plug the Power Controller into a wall socket.
2. The Discovery button is located on the side to the bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
3. Now simply plug your appliances into the power controller (2000mA MAX)
4. You can manually control the device by pressing the button located on the top right of the power controller.

 

Assemble Temperature Sensor

1. Assemble the antenna as shown in the video.
2. Insert the batteries correctly as indicated on the inside of the sensor.
3. Insert probe cable into the socket located on the bottom of the sensor.
4. The Discovery button is located on the rear left to the bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
5. Position the temperature probe either within a fridge or freezer. Do not position the sensor mechanism in a fridge or freezer or externally where it is open to the elements.

 

Assemble Water Sensor

1. Assemble the antenna as shown in the video.
2. Insert the batteries correctly as indicated on the inside of the sensor.
3. Insert probe cable into the socket located on the bottom of the sensor.
4. The Discovery button is located on the rear left to the bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
5. Position the water sensor probe flat on a surface or wall mounted to correctly detect water. You can position the sensor part higher to prevent water damage.

 

Assemble iButton / Panic Button

1. Insert the batteries correctly as indicated on the inside of the sensor.
2. The Discovery button is located on the rear left to the bottom of the device – ensure you have started Discovery in your remote access account before pressing this button.
3. The iButton can be used to control and sensor or device or as a panic button.

 

Assemble XAD700 Analogue Converter

Kratka obavijest

Nudimo Vam najinovativnije sustave tehničke zaštite koji se trenutno mogu naċi na našem tržištu.